Shenyang Lubricant Factory (Co., Ltd.)
Shenyang Lubricant Factory (Co., Ltd.)
Add to Cart
BSD68302
Marine system oil additive package
Typical Inspections
| Item | Range of criteria | Test Method |
| Appearance | Brown liquid | Visual Observation |
| Density ,20℃ kg/m3 | 950-1050 | GB/T1884 |
| Kinematic viscosity,100℃ mm2/s | Report | GB/T265 |
| Flash point(Open),℃ ≥ | 180 | GB/T3536 |
| TBN/(mgKOH/g) | 130-165 | SH/T0251 |
| Calcium ,%(m) | 4.8-5.9 | SH/T0270 |
| Nitrogen ,%(m) | 0.4-0.6 | SH/T0224 |
| Zinc ,%(m) | 0.95-1.2 | SH/T0226 |
Product Appearance
Packaging and acceptance
This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms as per customer requirements.
Product identification, sample retention, and delivery acceptance shall comply with the SH/T 0164 standard.
Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions
The product shall be stored, loaded, and unloaded in accordance with the SH/T 0164 standard. It must be clearly labeled during transportation, storage, and use to prevent mixing and cross-contamination with other petroleum products.
When blending oil, the maximum temperature should not exceed 75°C.
The long-term storage temperature should not exceed 50°C.
The shelf life of single-dose and composite products is 24 months (at ambient temperature). After opening and use, ensure proper sealed storage.
Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general
petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away
from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once
it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling
and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).