Shenyang Lubricant Factory (Co., Ltd.)
Shenyang Lubricant Factory (Co., Ltd.)
Add to Cart
BSD78560
Additive packaging for worm oil
These products are made from various additives, such as high-quality anti-friction and
Highly effective antioxidants. Worm wheel oil made from this composite has
It has excellent resistance to extreme stress, wear, oxidation and rust.
Recommended dose (% by weight)
BSD - 78560 Worm oil mixture with appropriate amount of emulsifier
Base oil of different viscosity, mixed evenly at 60 - 75 °C, then added 1.5%
Composite agent, L-CKE snail oil can be made: add 2.0% composite agent
It is possible to make worm oil L - CKE / P.
Typical inspection
Standard Project Scope Test Methodology
Appearance light yellow transparent liquid
Density, 20°C kg/m3 1100.0-1100.0 GB/T1884
Sports viscosity, 40°C mm2/s 30 GB/T265
Flash Temperature (Open), °C ≥102 GB/T267
Sulfur content,%(m)≥21 SH/T0303
Phosphorus content,%(m)≥0.85 SH/T0296
PS: 3.8% BSD78662+96.2% Base Oil (40% 150BS+60% 500N)
Product Appearance
Packaging and Storage
200L Metal barrels packed, stored in dry, clean, ventilated warehouse, storage temperature
Duration does not exceed 45°C. This product is not flammable, explosive, not corrosive.
It is comparable to conventional petroleum products in terms of safety, environmental protection and use.
When using, avoid contact with strong oxidant. When in contact with skin, wash with soap.
Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be
clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other
petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,
pay attention to sealed storage.
Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general
petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away
from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once
it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling
and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).