Shenyang Lubricant Factory (Co., Ltd.)
Shenyang Lubricant Factory (Co., Ltd.)
Add to Cart
BSD78661
General Purpose Oil Equipment Adding Package
BSD78661 is a set of high-quality technical additives for automotive and industrial gear oils,
It has excellent pressure, wear resistance, oxygen resistance, and anti-corrosion characteristics. Currently
Energy supply and environmental protection. It is more friendly to human health.
Environmental environment. nanomaterials added to the product, which reduces consumption
Active sulfur greatly reduces gearbox rejection. Furthermore, due to
Performance improvements, reduced friction of nanomaterials and life service in the rear of the car
Here is the transmission extension.
Product Features
● Meet the requirements of high-speed impact loads, low speed and high torque
● Wide range of corrosion
● Excellent printing adaptability
Recommended dose (% by weight)
API gl-5 Heavy Vehicles and Oil Accessories 3.8%
Institute gl-4 Average load of cars and oil equipment 2.0%
l-ckd Heavy industrial and petroleum materials 1.4%
1.2% l-ckc medium load industrial and petroleum equipment
Typical Inspections
| Item | Range of criteria | Test Method |
| Appearance | Light yellow transparent liquid | Visual Observation |
| Density ,20℃ kg/m3 | 1100.0-1100.0 | GB/T1884 |
| Kinematic viscosity,100℃ mm2/s | 2.0-6.0 | GB/T265 |
| Flash point(Open),℃ ≥ | 180 | GB/T267 |
| Boron content ,%(m) ≥ | 0.4 | SH/T0227 |
| Nitrogen ,%(m) ≥ | 0.22 | SH/T0224 |
| Sulfur content ,%(m) ≥ | 21 | SH/T0303 |
| Phosphorus content ,%(m) ≥ | 0.8 | SH/T0296 |
| Copper corrosion,100℃ 3h ≤ | 1a | GB/T5096 |
| Four-ball machine experiment PB/N ≥ PD/N ≥ |
1200 4000 | GB/T3142 |
| Wear spot diameter D / mm (392n, 60min) ≤ | 0.38 | SH/T0189 |
PS:3.8% BSD78662 + 96.2% base oil (40% 150BS + 60% 500N)
Product Appearance
Packaging and acceptance
This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according
to customer needs.
Product identification, sample retention, and delivery acceptance shall be carried out in accordance with
SH/T0164 standard.
Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be
clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other
petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,
pay attention to sealed storage.
Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general
petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away
from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once
it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling
and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).