Shenyang Lubricant Factory (Co., Ltd.)
Shenyang Lubricant Factory (Co., Ltd.)
Add to Cart
1, Product performance:
BSD-88065 is composed of high-quality anti-wear agents, antioxidant preservatives, high-temperature antioxidants, rust inhibitors, metal deactivators, and other composite materials. It has excellent anti-wear, anti-oxidation, anti rust/anti-corrosion, thermal stability, and sealing adaptability. BSD-88065 has strong load-bearing capacity and can be formulated with advanced anti-wear hydraulic oil.
2, Technical indicators:
| Project | Quality index | Test method |
| Appearance | Light yellow transparent liquid | Visualization |
| Density (20℃)/(kg/m3) | 1000-1050 | GB/T 1884 |
| kinematic viscosity (100℃)/(mm2/s) | report | GB/T265 |
| Flash point (opening)/℃ | ≥ 110 | GB/T267 |
| Phosphorus content,m/m% | ≥3.5 | SH/T0227 |
| SULFUR CONTENT m/m% | ≥6.5 | SH/T0303 |
| zinc m/m% | ≥3.2 | SH/T0226 |
3, Scope of application:
Suitable for API-I, II, III, IV base oils, and for modulating various hydraulic oils such as HL, HM, HK, HV, etc.
Recommended dosage: 0.65~0.8%.
4, Testing data
| Quality level: L-HM 46# | ||
| Project | Quality index | Experimental methods |
| BSD-88065 | 0.0065 | |
| Base oil | margin | |
| kinematic viscosity (40℃)/(mm2/s) | 46.7 | GB/T265 |
| viscosity index | 105 | GB/T2541 |
| Copper corrosion (100℃,3h) | ≤ 1a | GB/T5096 |
| demulsibility 40-37-3 | ≤ 10min | GB/T7305 |
| Corrosion Test (Method B) | No rust | GB/T11143 |
| abrasion resistance: PB (kg) | ≥88 | GB/T3142 |
| wear scar diameter D/mm(392N 60min) | ≤0.32 | GB/T3142 |
| FZG experiment, failure level | ≥10 | SH/T0306 |
| Blade pump experiment (100h, total weight loss)mg | ≤39 | SH/T0307 |
| Foam ml/ml 24 ℃ | 0/0 | GB/T 12579 |
| Foam ml/ml 93 .5℃ | 5/0 | GB/T 12579 |
| Foam ml/ml after 24 ℃ | 0/0 | GB/T 12579 |
| thermal oxidation stability:1500h TAN KOHmg/g | 0.11 | GB/T 12581 |
| thermal oxidation stability:1000h TAN KOHmg/ | 0.08 | GB/T 12581 |
| rotary bomb oxidation test 150℃ (BROT)Min | 600 | SH/T0193 |
| Hydrolytic stability: total acidity of the water layer mgKOH | ≤ 2.0 | SH/T0301 |
| Copper sheet appearance | No gray or black appeared | SH/T0301 |
| thermal stability:(135℃,168h) | SH/T0209 | |
| Weight loss of copper rod (mg/200ml) | 3.1 | |
| Total sediment weight (mg/100ml) | 10.8 | |
| Copper rod appearance | Not discolored | |
Product Appearance
Packaging and acceptance
This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according
to customer needs.
Product identification, sample retention, and delivery acceptance shall be carried out in accordance with
SH/T0164 standard.
Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be
clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other
petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,
pay attention to sealed storage.
Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general
petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away
from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once
it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling
and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).